67 62 020 Removing and installing/replacing flat motor for rear left or right power window regulator

Necessary preliminary tasks:

Removal:

Release screws (1).

Carefully rotate power window regulator (2).

Fig 1: Power Window Regulator And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Detach flat motor (1) from power windows unit (2).

Fig 2: Power Windows Unit And Flat Motor

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Position flat motor (1) correctly on power window regulator (2).

NOTE: Flat motor (1) must be placed exactly on the gearing of the power window regulator (2).

Fig 3: Power Windows Unit And Flat Motor

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

Tightening torque: 51 37 1AZ .

Fig 4: Power Window Regulator Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

After installation:

An initialization must be carried out in order to activate anti-trap mechanism.

Read and comply with NOTES on initialization of power window regulator.