65 13 080 Removing and installing/replacing speaker (tweeter in rear side trim panel)
Necessary preliminary tasks:
- Remove REAR SIDE TRIM PANEL .
Removal:
Disconnect connector (1).
Remove resistor (2) from holder.
Unlock latches at marked points.
Remove speaker (3) from side trim panel.
Installation:
Position speaker (3) correctly on side trim panel and engage it.
Engage resistor (2) in holder.
Connect the plug (1).
NOTE:
Speaker (3) is encoded against incorrect assembly.
Latch mechanisms must not be damaged or missing.
Required reworking:
- Install REAR SIDE TRIM PANEL .