65 12 210 Removing and installing/replacing CHAMP radio receiver (BMW Professional radio)

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Release screws (1).

Pull out the CHAMP (2) to the front.

Installation note:

Make sure CHAMP (2) is correctly seated on retaining lugs at the marked points.

Fig 1: Pulling CHAMP Radio Receiver

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (2) and disconnect.

Remove CHAMP (1).

Fig 2: Identifying CHAMP And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

For vehicles with Teleservices optional equipment:

Load service history: