61 71 030 Removing and installing/renewing all washer jets of windscreen washer system

Turn clamp (3) in direction of arrow and washer fluid line (2) in direction of arrow.

Disconnect plug connection (1) and remove from holder (4).

Fig 1: Identifying Washer Fluid Line, Clamp, Holder, And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Press all washer jets (1) in direction of arrow upwards and remove.

Fig 2: Removing Washer Jets

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

• Retaining lugs (1) must not be damaged.
• Check ADJUSTMENT OF WASHER JETS  and correct if necessary
• Filling capacity, windscreen washer fluid reservoir: 5.0 liters
  Fig 3: Identifying Retaining Lugs

  Courtesy of BMW OF NORTH AMERICA, INC.