61 31 037 Removing and installing/replacing light operating facility

Necessary preliminary work: 

• Remove DECORATIVE STRIP ON DASHBOARD ON LEFT

Removal: 

Release all screws (1) and detach light operating facility (2) from left decorative strip (3).

Fig 1: Identifying Light Operating Facility Screws And Decorative Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Join light operating facility (2) to left decorative strip (3).

Tighten all screws (1).

Fig 2: Identifying Light Operating Facility Screws And Decorative Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install DECORATIVE STRIP ON INSTRUMENT PANEL AT LEFT