51 45 370 Removing and installing (replacing) left decorative strip on dashboard
WARNING: This page is about a different variant/trim than selected.
Special tools required:
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Necessary preliminary tasks:
- Remove SIDE PANEL ON DASHBOARD , left
Release screw (1).
Lever out clamps on decorative strip in marked area with special tool 00 9 325 .
Unlock plug connection and disconnect.
Remove decorative strip with ventilation grille.
Installation note:
Make sure clamps are correctly fitted on decorative strip (1).
Replace defective clamps.
Replacement:
- Modify LIGHT OPERATING FACILITY .
- Modify LEFT FRESH AIR GRILLE