63 11 760 Replace FLEL control unit (Before 04/2015)

Attention. 

Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks: 

• Remove HEADLIGHT WITH LED TECHNOLOGY  on the left.

Release screws (1) and pull control unit of front light electronics (2) out of headlight (3).

Fig 1: Removing Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Gasket (1) on control unit of front light electronics must not be damaged and must be installed free from grease.

Plug-in contacts (2) on control unit of front light electronics must not be damaged or missing.

Fig 2: Identifying Gasket And Plug-In Contacts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/CODING .