41 61 000 Removing And Installing Engine Compartment Lid
WARNING: This page is about a different variant/trim than selected.
WARNING:
Danger of injury.
Support engine compartment lid in fully opened position with suitable apparatus.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
Support engine compartment lid in fully opened position with suitable apparatus.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
IMPORTANT:
These instructions only apply to vehicles without
active pedestrian protection.
Observe separate procedure for vehicles with ACTIVE PEDESTRIAN PROTECTION .
Observe separate procedure for vehicles with ACTIVE PEDESTRIAN PROTECTION .
Carry over schematic diagram to the relevant vehicle type.
Unscrew nuts (1).
Remove engine compartment lid.
Installation note:
Install engine compartment lid at screw locations to on hinge.
Tightening torque 41 61 1AZ .
If necessary, adjust ENGINE COMPARTMENT LID .