33 55 041 Replacing anti-roll bar link for anti-roll bar on left or right (640i, 640i xDrive, 650i, 650xi)
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
IMPORTANT:
Do not mix up anti-roll bar links
- Stabilizer link for active stabilizer
- Anti-roll bar link for conventional anti-roll bar
Vehicle with ARS
Unscrew nuts (1).
Remove anti-roll bar link (2).
Tightening torque 33 55 2AZ .
Installation note:
Replace self-locking nuts.
Vehicle without ARS
Slacken nut (1).
Tightening torque 33 55 2AZ .
Release nut (2) and remove anti-roll bar link (3).
Tightening torque 33 55 2AZ .
Installation note:
Replace self-locking nuts.