66 54 015 Replacing lens cover for night vision camera

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Unlock latch mechanisms (1) and unfasten cover (2) in direction of arrow.

Fig 1: Unfastening Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully remove sealing ring (1).

IMPORTANT: Adjoining surface of lens must not be damaged when sealing ring is removed.

Installation note:

Replace sealing ring.

Fig 2: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Thoroughly clean sealing joint (1) using SOLVENT CLEANER R2 and cotton buds.

Fig 3: Identifying Sealing Joint

Courtesy of BMW OF NORTH AMERICA, INC.

After installation: