37 12 012 Carry out ride height adjustment

WARNING: This page is about a different variant/trim than selected.

NOTE: Ride height adjustment must be carried out after the following work:

Removal/replacement of ride height sensor or its control rod (only necessary on vehicles with air suspension)
Replacement of EHC control unit (F01/F02/F04/F07/F11/F15/F16/F85/F86)
Replacement of ICM control unit (Integrated Chassis Management)

Connect diagnosis system.

Switch the ignition on.

Carry out ride height adjustment (menu item: "Service function").

IMPORTANT: Following ride height adjustment, for vehicles with: