36 11 000 Initialising Run Flat Indicator (RPA)
WARNING: This page is about a different variant/trim than selected.
NOTE:
Checking the tire pressure is based on speed monitoring of the wheels in relation to each other. A tire puncture is detected and signalled by way of a deviation in specific speed ratios.
The four tires mounted on the vehicle are monitored while the vehicle is driving.
Initialisation must be carried out in each case immediately after tire pressures have been corrected, after tires/wheels have been exchanged and after repair work to the air spring system.
The four tires mounted on the vehicle are monitored while the vehicle is driving.
Initialisation must be carried out in each case immediately after tire pressures have been corrected, after tires/wheels have been exchanged and after repair work to the air spring system.
IMPORTANT:
The Run Flat Indicator does not function when the vehicle is driven with the compact spare wheel.
Refer to the relevant Owner's Handbook for details of the initialization procedure .