65 12 210 Removing and installing (replacing) the radio receiver CHAMP

Necessary preliminary tasks: 

• Disconnect BATTERY NEGATIVE CABLE
• Remove RADIO AND IHKA CONTROLS

Release screws (1).

Pull out the CHAMP (2) to the front.

Installation note: 

Make sure CHAMP (2) is correctly seated on retaining lugs at the marked points.

Fig 1: Pulling Head Unit Forward

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Remove CHAMP (2).

Fig 2: Identifying CHAMP Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/ENCODING .

For vehicles with Teleservices optional equipment: 

• Update services via menu in the central information display.