LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 867 (Heating And Air Conditioning - Repair -- F31) >> Heater With Operation >> 64 11 213 Removing and installing/replacing heating and air conditioning blower

64 11 213 Removing and installing/replacing heating and air conditioning blower

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unlock plug connections (2) and disconnect.

Release screws at marked points.

Remove blower (1).

Installation note: 

Hold blower (1) in installation position and tighten all screws evenly.

Fig 1: Removing Blower And Plug Connections
G10098849Courtesy of BMW OF NORTH AMERICA, INC.