65 12 315 Removing and installing (replacing) HU-H)
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Risk of damage!
There is a hard disk installed in the headunit.
Carry out mechanical work on the headunit and adjacent components with care.
Avoid subjecting the headunit to vibration/shocks.
IMPORTANT:
Read and comply with NOTES
on protection against electrostatic damage (ESD protection).
NOTE:
Comply with notes and notes on HANDLING OPTICAL FIBRES
.
Necessary preliminary tasks:
- Remove RADIO AND IHKA CONTROLS .
- Disconnect battery earth lead . See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD or 61 20 900 DISCONNECTING AND CONNECTING BATTERY EARTH LEAD (F03: Disconnect both battery earth leads).
NOTE:
Picture for example purposes only!
Unfasten screws (2).
Pull headunit (3) out of guide.
Installation note:
Make sure headunit (3) is correctly seated in guide lugs (1).
Set the protective nonwoven material (1) aside as shown.
Unlock plug connections (2) and disconnect.
Remove headunit (3).
Only for US models with satellite radio:
When replacing the headunit, additional work is required!
- Refer to document REPLACING SATELLITE TUNER, AS OF 09/2009 .
Replacement:
Carry out VEHICLE PROGRAMMING AND ENCODING .
Load additionally for following vehicles' service history:
- F01, F02, F03, F07, F10, F11 with production date from 07/2013
Load service history:
- 05 Maintenance and Pre-Delivery Check
- Service history