64 11 973 Removing and installing or replacing ozone generator (before 09/2010)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The ozone generator was installed on vehicles built before 09/2010.

Necessary preliminary work:

Remove RIGHT GLOVE BOX WITH HOUSING

Disconnect plug connection (1).

Unlock ozone generator (2) in direction of arrow and remove towards front from filter housing (3).

Fig 1: Removing Ozone Generator

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

For purposes of clarity, illustration shows heating/air conditioning unit (1) removed.

Retaining lugs (3) on ozone generator (4) must be correctly engaged in guides on filter housing (3).

Fig 2: Identifying Heating/Air Conditioning Unit, Retaining Lugs, Ozone Generator And Filter Housing Guides

Courtesy of BMW OF NORTH AMERICA, INC.