64 11 902 Replacing interior temperature sensor blower (A/C control panel)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 450

Necessary preliminary tasks:

Remove RADIO AND IHKA CONTROLS

Release screws (1).

Tightening torque 61 31 2AZ .

NOTE: Use special tool 00 9 450 to tighten screws.

Remove fan (2) from IHKA controls (3).

Installation note:

Make sure pins (4) are correctly located on fan (2).

Fig 1: Identifying Fan, Screws, IHKA Controls And Pins

Courtesy of BMW OF NORTH AMERICA, INC.