61 71 030 Removing and installing/renewing all washer jets of windscreen washer system

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Turn clamp (3) in direction of arrow and washer fluid line (2) in direction of arrow.

Disconnect plug connection (1) and remove from holder (4).

Fig 1: Disconnecting Plug Connection And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Press all washer jets (1) in direction of arrow upwards and remove.

Fig 2: Pressing Washer Jets

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs (1) must not be damaged.
Check ADJUSTMENT OF WASHER JETS and correct if necessary
Observe FILLING CAPACITY FOR WINDSCREEN WASHER SYSTEM

Fig 3: Identifying Retaining Lugs
Courtesy of BMW OF NORTH AMERICA, INC.