61 31 197 Removing/installing (replacing) center console control panel (M5 with twin-clutch gearbox)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Observe NOTES ON PROTECTION FROM ELECTROSTATIC DISCHARGE .

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks:

Remove CENTER CONSOLE TRIM

Release screws (1).

Release latch mechanisms.

Remove center console operating facility (2) from center console cover (3).

Installation note:

Latch mechanisms must not be damaged or missing.

Fig 1: Locating Center Console Operating Facility From Center Console Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remount ELECTROMECHANICAL PARKING BRAKE .