61 35 095 Removing and installing control unit/module for seat heating (rear seat)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks:

REMOVE AND INSTALL REAR SEAT

Disconnect plug connection (1).

Unclip clip (2) and remove control unit for seat heating (3).

Fig 1: Identifying Seat Heating Control Unit And Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure mount (1) and retaining lugs (3) of control unit for seat heating (2) are correctly seated.

Fig 2: Identifying Seat Heating Control Unit And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.