31 60 Output shaft
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft console to engine oil sump | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M8 | 19 Nm | |
| 2AZ | Output shaft to wheel hub | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M16 | Observe instructions in Repair Manual. Refer to 31 60 005 REMOVING AND INSTALLING/REPLACING BOTH OUTPUT SHAFTS , 31 60 000 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT OUTPUT SHAFT , 31 21 180 REPLACING BEARINGS (WHEEL HUB) FOR FRONT WHEEL and 31 12 050 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT TRAILING LINK . | |
| Replace collar bolt and spring. | |||||
| Jointing torque | 210 Nm | ||||
| Angle of rotation | 90 ° | ||||