13 71 165 Removing bottom clean air pipe (N20, N26)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove top CLEAN AIR PIPE .
Remove ENGINE VENTILATION LINE .

Unlock tank ventilation line (1) and disconnect.

Fig 1: Identifying Tank Ventilation Line

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) below bottom clean air pipe (2).

Tightening torque 13 71 5AZ .

Pull off, thread out and remove bottom clean air pipe (2) from exhaust turbocharger.

Check gasket, renew damaged gasket.

Fig 2: Identifying Air Pipe Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.