LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 730 (Maintenance And General Information - Special Tools) >> Maintenance And General Data >> 0495187 Assembly stand >> 0495187 002300 Assembly stand AM >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

01 25 04 (155)

Consisting of:

  1. 0495188  Assembly stand
    NOTE: available only as complete assembly support 83 30 0 495 187.
    Fig 1: Identifying Assembly Stand (0495187)
    G09964593Courtesy of BMW OF NORTH AMERICA, INC.
  2. 0495189  Tool
    NOTE: (Universal flange). Do not use any more!!! Technically locked. Replaced with a new flange with material number 83 30 2 299 563. All flanges delivered until the end of 2011 will be replaced at no charge. From 2012, only the new flange will be supplied. Also applies to the complete engine mounting stand 00 2 300.
  3. 0495200  Crank

    Note:

  4. 0495201  Cover
    NOTE: (Protective hood)
  5. 0495202  oddments tray
    NOTE: (Oddments tray for small parts)
  6. 0495203  Shaped element
    NOTE: (Rear shaped pan)
  7. 0495204  Collection pan
    NOTE: (Oil collection pan)
  8. 0495205  Shaped element
    NOTE: (Front shaped pan)
  9. 0495206  Wheel
    NOTE: (Front wheel (without stop))
  10. 0495207  Wheel
    NOTE: (Rear wheel (with stop))
  11. 0495208  Mat
    NOTE: (Checker mat set)
  1. 2 = 2299563  Adapter
    NOTE: New adapter for the engine assembly stand. Replacement for 83 30 0 495 189 - 00 2 302.