72 11 092 Removing and installing or replacing rear left or right seat belts
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR SEAT
- Remove TRIM, C-PILLAR
Removing left or right automatic reel:
Protective cap(1)
Release screw (2).
Tightening torque 72 11 21AZ .
Installation note:
End fitting is coded against incorrect assembly.
Release screw (1).
Tightening torque 72 11 24AZ .
Remove belt deflector.
Unfasten screws (2).
Tightening torque 72 11 20AZ .
Remove automatic reel with anchor fitting.
Installation note:
Automatic reel is coded against incorrect installation.