67 62 000 Removing and installing or replacing flat motor for front left or right power window unit
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove FRONT POWER WINDOW UNIT
Release screws (1) and detach flat motor (2) from power window unit.
Tightening torque: 67 62 1AZ
After installation
An initialization must be carried out in order to activate anti-trapping protection.
Read and comply with NOTES on initializing power windows.