LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 707 (Fuel System - Repair) >> Intake Silencer >> 13...... Removing intake duct (N63)

13...... Removing intake duct (N63)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:  Remove TENSION STRUTS on left and right

NOTE: Picture describes the left side, the procedure for the right side is identical.

Press in catch (1).

Feed out intake duct (2) towards top.

Fig 1: Identifying Catch And Intake Duct
G00532893Courtesy of BMW OF NORTH AMERICA, INC.

Press in catch (1).

Detach intake duct (2) towards rear and remove.

Fig 2: Detaching Intake Duct Toward Rear
G00532617Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals