LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (General Electrical System - Repair) >> Headlight Cleaning System, Night Vision Washer Jets >> 61 67 200 Removing and installing/replacing washer jet for Night Vision camera

61 67 200 Removing and installing/replacing washer jet for Night Vision camera

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screws (1).

Remove high-pressure nozzle (2) from Night Vision camera (3).

Installation note: 

New washer jet is already preset.

Run a function check.

Fig 1: Identifying High-Pressure Nozzle With Screws And Night Vision Camera
G06895149Courtesy of BMW OF NORTH AMERICA, INC.