84 10 050 Removing and installing (replacing) USB hub

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary work

Remove TRIM PANEL FOR DOOR PILLAR, (BOTTOM) LEFT .

Disconnect plug connection (1).

Release screws (2) and remove USB hub (3).

Fig 1: Identifying Plug Connection, USB Hub And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/ENCODING .