63 21 101 Replacing sealing frame for left or right rear light (on side panel)
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove and install left or right REAR LIGHT .
Detach sealing frame (1) from rear light (2).
Installation:
Make sure sealing frame (1) is correctly bonded all round on rear light (2).