LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (General Electrical System - Repair) >> Headlight Washer System >> 61 67 200 Removing and installing/replacing washer jet for Night Vision camera

61 67 200 Removing and installing/replacing washer jet for Night Vision camera

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks 

Release screws (1).

Remove high-pressure nozzle (2) from Night Vision camera (3).

Installation note: 

New washer jet is already preset.

Run a function check.

Fig 1: Identifying High-Pressure Nozzle With Screws And Night Vision Camera
G08422604Courtesy of BMW OF NORTH AMERICA, INC.