LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1120 (Engine - Variable Valve Timing Control System (VANOS), Intake Plenum, Turbocharger, Water Pump, Thermostat, Coolant Lines, EGR Valve, EGR Cooler, Oxygen Sensors - Repair) >> Thermostat And Coolant Lines >> N57 Diesel Engine >> 11 53 742 Removing and installing/replacing coolant pipe (N57 Diesel)

11 53 742 Removing and installing/replacing coolant pipe (N57 Diesel)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work: 

Release screws (1).

Tightening torque 11 12 5AZ .

Remove connecting branches.

Replace gasket.

Fig 1: Identifying Screws
G09925007Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Top up COOLANT .

CHECKING COOLING SYSTEM FOR LEAK TIGHTNESS .

scientia non olet · About LEMON Manuals