11 00 Mounting Engine On Assembly Stand (S63)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

WARNING:

Remove engine with hoist and special tool 11 0 020 .

Fit special tool 11 8 930 on engine.

Engine weighs approx. 280 kg.

Necessary preliminary tasks:

- Fully remove FRONT AXLE WITH ENGINE .

- Clean contact surfaces.

Use special tool 11 8 931 to mount special tool 11 8 932 .

Insert screws (1 and 2).

Tightening torque: 11 11 9AZ .

Fig 1: Identifying Special Tool And Screws

G00554311

Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 11 8 931 to mount engine on special tool 00 2 300 .

Tightening torque: 11 11 10AZ .

Graphic shows engine N63.

Fig 2: Mounting Engine On Special Tool (00 2 300) Using Special Tool (11 8 931)

G05907609

Courtesy of BMW OF NORTH AMERICA, INC.