11 00 Mounting engine on assembly stand (N52)
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Aluminum screws/bolts must be replaced each time they are released
.
Aluminum screws/bolts are permitted with and without color coding (blue).
For reliable identification:
Aluminum screws/bolts are not magnetic .
Joining torque and angle of rotation must be observed without fail (risk of damage) .
Aluminum screws/bolts are permitted with and without color coding (blue).
For reliable identification:
Aluminum screws/bolts are not magnetic .
Joining torque and angle of rotation must be observed without fail (risk of damage) .
NOTE:
Special tools 11 8 542 and 11 8 541 are included in set of special tools 11 8 540
.
Necessary preliminary tasks:
- Remove ENGINE .
Use special tool 11 8 541 to attach engine to special tool 00 2 300 .
Use special tool 11 8 542 to attach engine or engine block to 11 8 541.