51 34 211 Replace rubber window seal for rear left or right side window

Necessary preliminary tasks: 

• Remove COVER ON INSIDE OF DOOR WINDOW FRAME 
• Remove DECORATIVE STRIP FROM WINDOW FRAME 

Feed out rubber guide (1) at bottom and out of side window guides.

Fig 1: Feeding Out Rubber Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Moisten rubber guide (2) FOR SIDE FITTING WITH APPROVED LUBRICANT .

If necessary, retract door window glass (1) approx. 50 mm into rubber guide.

Open door window glass and at same time slide rubber guide downwards into window guide (3).

Rubber guide must not be damaged or missing.

Fig 2: Pushing Rubber Guide On Door Window Glass And Window Guide

Courtesy of BMW OF NORTH AMERICA, INC.