51 34 380 Remove and install/replace frame trim on window frame of (outer) rear door on the left or right

Special tools required:

Do not scratch or damage visible surfaces.

Necessary preliminary work

Pull out rubber window seal in the frame trim area on the window border (1) (illustration shows removed status).

Lever out frame trim on window border (1) from the front beginning with special tool 00 9 325 .

Fig 1: Removing Frame Trim On Window Border With Special Tool (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully pull off frame trim (1) in outwards direction.

Fig 2: Removing Frame Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace faulty clamps (1).

Fig 3: Identifying Window Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Only with vehicle type Saloon:

Feed in the frame trim on the window frame (1) at the rear correctly behind the weather strip.

Fig 4: Identifying Frame Trim On Window Border

Courtesy of BMW OF NORTH AMERICA, INC.