Condition for fault identification

Voltage precondition:

None

Temperature precondition:

Ambient temperature at engine start must be greater than -7.5°C

$(C_TAM_MIN_TIA_PLAUS_DIAG) and less than 35.3°C

$(C_TAM_MAX_TIA_PLAUS_DIAG), engine temperature > 79°C

$(C_TCO_MIN_IS_CDN_TIA_PLAUS)

Time precondition:

Time after engine start > 60 s $(C T DLY TIA IM DIAG)

Other preconditions:

Cruise >40 km/h

$(C_VS_MIN_TIA_PLAUS_DIAG) for >120 s

$(C_T_VS_MIN_TIA_PLAUS_DIAG) + 2 x (air mass >220 mg/stroke

$(C_MAF_MIN_INT_CDN_TIA_PLAUS) for >60 s

$(C_T_LOAD_IS_CDN_TIA_PLAUS), subsequently idle 60 s)