51 13 116 Removing and installing/replacing cowl panel cover

Necessary preliminary tasks: 

• Remove BOTH WINDSCREEN WIPER ARMS .
• Remove COVER IN ENGINE COMPARTMENT  on the left and right

Release expanding rivets/clips (1) on left/right.

Turn snap fastener (2) approx. 90° counterclockwise.

Lift out cover (3).

Installation note: 

Replace damaged expanding rivets/clips (1).

Check cover (3) for correct fit.

Close snap fasteners (2) from the middle.

Fig 1: Cowl Panel Cover, Snap Fastener And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

The fastener is closed if the arrow tips point to each other.