61 61 100 Removing and installing/replacing both windscreen wiper arms

Special tools required:

IMPORTANT: After installation check setting dimension and contact angle of the wiper arm.

Remove protective cap (1).

Release nut underneath.

Tightening torque: 61 61 2AZ .

Fig 1: Removing Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of breakage!
Do not bend wiper arm when removing.

Detach windscreen wiper arm with special tool 61 6 060.

Fig 2: Detaching Wiper Arm Using Special Tool (61 6 060)

Courtesy of BMW OF NORTH AMERICA, INC.