LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> 435i xDrive Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair - F32 >> Roof Trim Panel >> 51 44 011 Removing and installing/replacing headlining (version with slide/tilt sunroof)

51 44 011 Removing and installing/replacing headlining (version with slide/tilt sunroof)

Necessary preliminary tasks: 

Fully release rear edge protection on driver's side

Depending on version: 

Complete removal only: 

Open coat hook halfway.

Press clamps together and feed coat hook out towards the inside.

Fig 1: Pressing Headlining Clamps
G10196359Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) in area of C-pillar left/right.

Fig 2: C-Pillar Screw
G10062988Courtesy of BMW OF NORTH AMERICA, INC.

Move both front seat backrest as far back as possible.

Detach edge protection (1) toward the inside.

IMPORTANT: The following tasks must be carried out with a second person assisting:

Undo the headlining (3) at the clips (2).

Fig 3: Headlining Clips And Edge Protection
G10097421Courtesy of BMW OF NORTH AMERICA, INC.

Set headlining (3) down and take out through the windscreen opening.

Installation note: 

Replace faulty clips (2).