63 25 004 Removing and installing/replacing additional brake light

Release cover for additional brake light (1) from clip (2).

Release cover for additional brake light (1) at retaining hook (3) and remove.

Fig 1: Releasing Cover For Additional Brake Light From Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clips (1), guides (2) and retaining hooks (3) on the cover for additional brake light (4) must not be damaged.

Make sure cover for additional brake light (4) is correctly seated.

Fig 2: Identifying Additional Brake Light Cover, Clips, Guides And Retaining Hooks

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Unlock the slide (2) in the direction of the arrow and remove the additional brake light (3) from the rear window.

Installation note:

Make sure additional brake light (3) is correctly positioned on rear window.

Fig 3: Removing Additional Brake Light

Courtesy of BMW OF NORTH AMERICA, INC.