LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 971 (General Electrical System - Repair - F13) >> Switch >> 61 31 117 Removing and installing/replacing power window switch (driver's side)

61 31 117 Removing and installing/replacing power window switch (driver's side)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release power window regulator switch (1) at latch mechanisms (2) on both sides.

Pull power window regulator switch (1) out of power window regulator switch cover (3).

Installation note: 

Ensure correct latching of power window regulator switch (1) in power window regulator switch cover (3).

Fig 1: Identifying Power Window Regulator Switch, Cover, And Latch Mechanisms
G10064209Courtesy of BMW OF NORTH AMERICA, INC.