65 50 030 Removing and installing/replacing TV module
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
NOTE:
Follow INSTRUCTIONS
for handling optical fibres.
Necessary preliminary tasks:
- Disconnect BATTERY NEGATIVE LEAD
- Remove LUGGAGE COMPARTMENT TRIM ON LEFT SIDE PANEL
Lever out expansion rivets (1).
Feed out storage compartment (2) towards top.
Unscrew nuts (1).
Raise TV module including bracket (2).
Unlock and disconnect associated plug connections (3).
Feed out TV module (2).
Replacement:
Release screws (1).
Remove bracket (2) from TV module.