65 77 016 Removing and installing/replacing airbag control unit

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Observe AIRBAG SAFETY INSTRUCTIONS .

Incorrect handling can activate airbag and cause injury.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE LEAD and cover.
Remove COMPLETE CENTER CONSOLE .

Unlock plug connections (1) and disconnect.

Unscrew nuts (2).

Tightening torque 65 77 1AZ .

Remove airbag control unit (3).

Fig 1: Identifying Airbag Control Unit With Plug Connections And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/CODING .