64 11 829 Removing and installing/replacing servodrive for ventilation flaps (automatic air conditioning)

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove HEATER/AIR CONDITIONER FAN

Release screws (1).

Pull out servodrive for ventilation flaps (2).

Unlock plug connection (3) and disconnect.

Fig 1: Identifying Servodrive For Ventilation Flaps With Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Servomotors must be readdressed in the event of replacement!

Addressing can only be carried out with the BMW diagnosis system.

Service functions:

Body
Heating and air conditioning function
Flap motors
Readdress flap motors