LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Heating And Air Conditioning - Repair -- Z4_E89) >> HVAC Control Panel, Blower, HVAC Sensors, Blending Flap Actuators >> 64 11 213 Removing and installing/replacing heater/air conditioner fan

64 11 213 Removing and installing/replacing heater/air conditioner fan

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Remove air duct (1).

Unfasten plug connection (2) and disconnect.

Fig 1: Identifying Air Duct With Plug Connection
G06912043Courtesy of BMW OF NORTH AMERICA, INC.

Raise lug (1).

Release fan motor (2) in direction of arrow.

Fig 2: Releasing Fan Motor
G06912044Courtesy of BMW OF NORTH AMERICA, INC.

Pull fan motor (1) forwards a little and then turn until controller (2) points downwards.

Feed out fan motor (2).

Fig 3: Removing Fan Motor
G06912045Courtesy of BMW OF NORTH AMERICA, INC.