32 00... Moving vehicle into design position
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to FRONT AXLE - RIDE HEIGHT and REAR AXLE - RIDE HEIGHT ).
Measure ride-level height of vehicle. See MEASURING RIDE HEIGHT (FRONT AXLE) and MEASURING RIDE HEIGHT (REAR AXLE) .