51 24 146 Removing and installing button for actuating rear lid
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR LID LOCK
Disconnect plug connection (1) at microswitch.
Slacken screws (2) until retaining ring (3) can be turned.
Tightening torque 51 24 11AZ .
Turn retaining ring (3) in direction of arrow and remove button (4) from rear lid.
Installation:
Perform function check with rear lid open.