51 64 035 Removing and installing/replacing cross-member upper section (connection of both front wheel arches)
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove intake duct on intake silencer housing. See REPLACING INTAKE SILENCER HOUSING (N20) or REPLACING THE INTAKE SILENCER HOUSING (N54) .
Release screws (1).
Tightening torque 51 71 23AZ .
Remove cross-member (2).