LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1334 (General Electrical System - Repair -- Z4_E89) >> Control Units, Modules, Sensors, Aerials >> 61 35 953 Removing and installing/replacing interior aerial for comfort access system

61 35 953 Removing and installing/replacing interior aerial for comfort access system

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Unlock and remove interior aerial for comfort access system (2) from holder (3).

Installation: 

Make sure interior aerial for comfort access system (2) is correctly seated in designated holder (3).

Fig 1: Identifying Comfort Access System Interior Aerial, Holder And Plug Connection
G11153293Courtesy of BMW OF NORTH AMERICA, INC.