33... Grease for flange nut and drive flange
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
The following grease should be used for greasing the contact surfaces of the flange nut to the bearing inner ring and to the insert nut, and for greasing the face of the drive flange:
- Castrol Optitemp HAT LF1, BMW part number 83 23 0 417 754 (50 g tube)
- Drei Bond adhesive Type 1385, BMW part number 83 19 0 417 376 (50 g tube)